torch.cat((tensor1,tensor2), dim)

将两个tensor连接起来，具体如何连接见下面例子

x = torch.rand((2,2,3))
y = torch.rand((2,2,3))
print("x:",x)
print("y:",y)
print("dim=0:", torch.cat((x,y),dim=0))
print("dim=1:", torch.cat((x,y), dim=1))
print("dim=2:", torch.cat((x, y), dim=2))

输出：

x: tensor([[[0.2571, 0.9011, 0.7935],
         [0.9308, 0.3267, 0.3290]],

        [[0.6155, 0.4739, 0.7251],
         [0.8025, 0.0424, 0.8101]]])

y: tensor([[[0.8813, 0.1149, 0.7757],
         [0.4733, 0.9003, 0.3300]],

        [[0.2597, 0.5810, 0.2507],
         [0.1220, 0.2260, 0.5620]]])

dim=0: tensor([[[0.2571, 0.9011, 0.7935],
         [0.9308, 0.3267, 0.3290]],

        [[0.6155, 0.4739, 0.7251],
         [0.8025, 0.0424, 0.8101]],

        [[0.8813, 0.1149, 0.7757],
         [0.4733, 0.9003, 0.3300]],

        [[0.2597, 0.5810, 0.2507],
         [0.1220, 0.2260, 0.5620]]])

dim=1: tensor([[[0.2571, 0.9011, 0.7935],
         [0.9308, 0.3267, 0.3290],
         [0.8813, 0.1149, 0.7757],
         [0.4733, 0.9003, 0.3300]],

        [[0.6155, 0.4739, 0.7251],
         [0.8025, 0.0424, 0.8101],
         [0.2597, 0.5810, 0.2507],
         [0.1220, 0.2260, 0.5620]]])

dim=2: tensor([[[0.2571, 0.9011, 0.7935, 0.8813, 0.1149, 0.7757],
            [0.9308, 0.3267, 0.3290, 0.4733, 0.9003, 0.3300]],

        [[0.6155, 0.4739, 0.7251, 0.2597, 0.5810, 0.2507],
         [0.8025, 0.0424, 0.8101, 0.1220, 0.2260, 0.5620]]])
[Finished in 2.1s]

torch.stack((tensor1, tensor2), dim)

x = torch.rand((2,2,3))
y = torch.rand((2,2,3))
print("x:",x)
print("y:",y)
print("dim=0:", torch.stack((x,y),dim=0))
print("dim=1:", torch.stack((x,y), dim=1))
print("dim=2:", torch.stack((x, y), dim=2))
print("dim=3", torch.stack((x, y), dim=3))

输出：

x: tensor([[[0.5099, 0.3434, 0.3731],
         [0.8523, 0.4672, 0.4163]],

        [[0.3364, 0.4910, 0.2302],
         [0.7896, 0.8119, 0.3978]]])

y: tensor([[[0.3843, 0.7627, 0.9757],
         [0.0065, 0.5462, 0.2765]],

        [[0.1890, 0.1698, 0.4486],
         [0.3459, 0.5552, 0.1908]]])

dim=0: tensor([[[[0.5099, 0.3434, 0.3731],
          [0.8523, 0.4672, 0.4163]],

         [[0.3364, 0.4910, 0.2302],
          [0.7896, 0.8119, 0.3978]]],


        [[[0.3843, 0.7627, 0.9757],
          [0.0065, 0.5462, 0.2765]],

         [[0.1890, 0.1698, 0.4486],
          [0.3459, 0.5552, 0.1908]]]])

dim=1: tensor([[[[0.5099, 0.3434, 0.3731],
          [0.8523, 0.4672, 0.4163]],

         [[0.3843, 0.7627, 0.9757],
          [0.0065, 0.5462, 0.2765]]],


        [[[0.3364, 0.4910, 0.2302],
          [0.7896, 0.8119, 0.3978]],

         [[0.1890, 0.1698, 0.4486],
          [0.3459, 0.5552, 0.1908]]]])

dim=2: tensor([[[[0.5099, 0.3434, 0.3731],
          [0.3843, 0.7627, 0.9757]],

         [[0.8523, 0.4672, 0.4163],
          [0.0065, 0.5462, 0.2765]]],


        [[[0.3364, 0.4910, 0.2302],
          [0.1890, 0.1698, 0.4486]],

         [[0.7896, 0.8119, 0.3978],
          [0.3459, 0.5552, 0.1908]]]])

dim=3 tensor([[[[0.5099, 0.3843],
          [0.3434, 0.7627],
          [0.3731, 0.9757]],

         [[0.8523, 0.0065],
          [0.4672, 0.5462],
          [0.4163, 0.2765]]],


        [[[0.3364, 0.1890],
          [0.4910, 0.1698],
          [0.2302, 0.4486]],

         [[0.7896, 0.3459],
          [0.8119, 0.5552],
          [0.3978, 0.1908]]]])
[Finished in 2.2s]

注意stack和cat的区别:

stack操作后会在原来的基础上再增加一维，比如原来两个tensor的维度都是3维，经过stack后的结果为4维tensor； 而cat操作其结果和原来的tensor保持一致,具体stack和cat如何连接两个tensor见上方例子。