0
点赞
收藏
分享

微信扫一扫

【实验分享】CCIE—BGP反射器实验

​实验目的:

l掌握BGP反射器的运行原理

l理解反射器的用途以及好处

实验说明:

l通过此实验练习,可以灵活的使用BGP反射器

实验环境:

l三台支持SPSERVICES的IOS的路由器

l直通线

实验拓扑:

【实验分享】CCIE—BGP反射器实验_CCIE


实验步骤:

R1(config)#interface f0/0

R1(config-if)#ip address 12.1.1.1 255.255.255.0

R1(config-if)#no shutdown

R1(config-if)#int lo 0

R1(config-if)#ip address 1.1.1.1 255.255.255.255

R1(config)#router ospf 110

R1(config-router)#router-id 1.1.1.1

R1(config-router)#network 1.1.1.1 0.0.0.0 a 0

R1(config-router)#network 12.1.1.1 0.0.0.0 a 0

R1(config)#router bgp 100

R1(config-router)#bgp router-id 1.1.1.1

R1(config-router)#neighbor 2.2.2.2 remote-as 100

R1(config-router)#neighbor 2.2.2.2 update-source loopback 0

R1(config-router)#neighbor 2.2.2.2 next-hop-self{当R1通过EBGP学到的路由传给2.2.2.2的时候告诉2.2.2.2,当2.2.2.2收到此路由的时候下一跳为R1的环回口}

R2(config)#interface f0/0

R2(config-if)#ip address 12.1.1.2 255.255.255.0

R2(config-if)#no shutdown

R2(config-if)#int f1/0

R2(config-if)#ip address 23.1.1.2 255.255.255.0

R2(config-if)#no shutdown

R2(config-if)#int lo 0

R2(config-if)#ip address 2.2.2.2 255.255.255.255

R2(config)#router ospf 110

R2(config-router)#router-id 2.2.2.2

R2(config-router)#network 12.1.1.2 0.0.0.0 a 0

R2(config-router)#network 23.1.1.2 0.0.0.0 a 0

R2(config-router)#network 2.2.2.2 0.0.0.0 a 0

R2(config)#router bgp 100

R2(config-router)#bgp router-id 2.2.2.2

R2(config-router)#neighbor 1.1.1.1 remote-as 100

R2(config-router)#neighbor 1.1.1.1 update-source lo 0

R2(config-router)#neighbor 1.1.1.1 route-reflector-client {1.1.1.1是我的客户端}

R2(config-router)#neighbor 3.3.3.3 remote-as 100

R2(config-router)#neighbor 3.3.3.3 update-source lo 0

R2(config-router)#neighbor 3.3.3.3 route-reflector-client{3.3.3.3是我的客户端}

R3(config)#interface f1/0

R3(config-if)#ip address 23.1.1.3 255.255.255.0

R3(config-if)#no shutdown

R3(config-if)#int lo 0

R3(config-if)#ip address 3.3.3.3 255.255.255.255

R3(config)#router ospf 110

R3(config-router)#router-id 3.3.3.3

R3(config-router)#network 23.1.1.3 0.0.0.0 a 0

R3(config-router)#network 3.3.3.3 0.0.0.0 a 0

R3(config)#router bgp 100

R3(config-router)#bgp router-id 3.3.3.3

R3(config-router)#neighbor 2.2.2.2 remote-as 100

R3(config-router)#neighbor 2.2.2.2 update-source lo 0

R3(config-router)#neighbor 2.2.2.2 next-hop-self

通过RR(反射器)技术能够打破IBGP的水平分割,通过RR技术能够减少IBGP建立邻居关系,比如R1,R2,R3要学到相应路由,必须要建立3个邻居关系,R1和R2,R2和R3,R1和R3。而RR的技术

只需要R1,R3分别和R2建立邻居就行。

R1宣告路由

R1(config)#int lo 11

R1(config-if)#ip address 11.11.11.11 255.255.255.255

R1(config)#router bgp 100

R1(config-router)#network 11.11.11.11 mask 255.255.255.255

验证:

R2#show ip bgp 11.11.11.11

BGP routing table entry for 11.11.11.11/32, version 2

Paths: (1 available, best #1, table Default-IP-Routing-Table)

Flag: 0x820

Advertised to update-groups:

2

Local, (Received from a RR-client) {从客户端(1.1.1.1)学到路由11.11.11.11}

1.1.1.1 (metric 2) from 1.1.1.1 (1.1.1.1)

Origin IGP, metric 0, localpref 100, valid, internal, best

R3#show ip bgp 11.11.11.11

BGP routing table entry for 11.11.11.11/32, version 2

Paths: (1 available, best #1, table Default-IP-Routing-Table)

Flag: 0x820

Not advertised to any peer

Local

1.1.1.1 (metric 3) from 2.2.2.2 (2.2.2.2)

Origin IGP, metric 0, localpref 100, valid, internal, best

Originator: 1.1.1.1, Cluster list: 2.2.2.2{1.1.1.1产生的路由,通过RR(2.2.2.2)反射给3.3.3.3}

总结:

通过RR技术合理的打破IBGP水平分割,实施起来更加方便。

RR原则:

从客户端过来的路由, RR会把它传递给我的客户端, 非客户端, EBGP邻居。

从EBGP邻居过来的路由, RR会把它传递给我的客户端, 非客户端, EBGP邻居。

从非客户端过来的路由, RR会把它传递给我的客户端, EBGP邻居, 不会传给非客户端。


举报

相关推荐

0 条评论