0
点赞
收藏
分享

微信扫一扫

Linux服务器网卡绑定配置

龙驹书房 2022-03-10 阅读 87

Linux服务器网卡绑定配置_centos

(图片来自视觉中国)

网卡绑定是通过把多张网卡绑定为一个逻辑网卡,实现本地网卡的冗余,带宽扩容和负载均衡。bond在实际网络应用部署中是一种常用的技术

下面介绍如何在CentOS服务器上实现网卡绑定

Linux服务器网卡绑定配置_centos_02


1、服务器ifconfig查看可以看到有两块网卡eth0,eth1

Linux服务器网卡绑定配置_服务器_03

要实现物理网口eth0,eth1网卡绑定,绑定后的虚拟逻辑网口bond0 IP地址和原来的eth0的IP保持一致

2、modinfo bonding 检查自己的​操作系统是否支持bonding 

Linux服务器网卡绑定配置_网卡绑定_04

 如果没有消息返回,说明内核不支持bonding,需要重新编译内核

3、检查ifenslave,是否有这个命令

Linux服务器网卡绑定配置_网卡绑定_05

4、接下来进入正题

在cd /etc/sysconfig/network-scripts/下创建ifcfg-bond0配置文件

[root@YuanFan-CentOS ~]# cd /etc/sysconfig/network-scripts/

[root@YuanFan-CentOS network-scripts]# vi ifcfg-bond0

DEVICE=bond0

TYPE=Ethernet

ONBOOT=yes

BOOTPROTO=none

IPADDR=192.168.31.2

NETMASK=255.255.255.0

GATEWAY=192.168.31.1

DNS1=114.114.114.114

DNS2=1.1.1.1

USERCTL=no

Linux服务器网卡绑定配置_服务器_06

接下来修改ifcfg-eth0和ifcfg-eth1两块物理网卡的配置文件

将原有的IP、子网掩码、网关信息等信息全部删除,修改成如下格式

[root@YuanFan-CentOS ~]# cd /etc/sysconfig/network-scripts/

[root@YuanFan-CentOS network-scripts]# vi ifcfg-eth0

DEVICE=eth0

ONBOOT=yes

BOOTPROTO=none

MASTER=bond0

SLAVE=yes

USERCTL=no

Linux服务器网卡绑定配置_网卡绑定_07

[root@YuanFan-CentOS network-scripts]# vi ifcfg-eth1

DEVICE=eth1

ONBOOT=yes

BOOTPROTO=none

MASTER=bond0

SLAVE=yes

USERCTL=no

Linux服务器网卡绑定配置_centos_08

5、​修改modprobe相关设定文件,并加载bonding模块

[root@YuanFan-CentOS ~]#

 vi /etc/modprobe.d/bonding.conf

alias bond0 bonding

options bonding mode=6 miimon=200

Linux服务器网卡绑定配置_centos_09

加载bonding模块

[root@YuanFan-CentOS ~]# modprobe bonding

如果这时是SecureCRT等SSH终端连接的服务器后台,会话可能会断开,在服务器上确认bonding模块是否加载,然后用service network restart或者​/etc/init.d/network restart命令重启网络

[root@YuanFan-CentOS ~]# lsmod | grep bonding

bonding               132885  0 

[root@YuanFan-CentOS ~]# service network restart

Shutting down interface bond0:  [  OK  ]

Shutting down loopback interface:  [  OK  ]

Bringing up loopback interface:  [  OK  ]

Bringing up interface bond0:  Determining if ip address 192.168.31.2 is already in use for device bond0...

[  OK  ]

[root@YuanFan-CentOS ~]# 

Linux服务器网卡绑定配置_centos_10

查看bond网卡绑定后的模式

cat /proc/net/bonding/bond0 

[root@YuanFan-CentOS ~]# cat /proc/net/bonding/bond0 

Linux服务器网卡绑定配置_centos_11

6、测试一下负载均衡功能

手动断开eth0链路的网线,看网络是否还通

如下图所示ethtool eth0 可以看到eth0网口已经断开,右侧可以看到ping 192.168.31.1网关一直可以ping通

Linux服务器网卡绑定配置_centos_12

注:mode bond网卡绑定的几种模式之前有介绍,请参见本公众号历史文章

mode:Mode of operation

0 for balance-rr, 

1 for active-backup, 

2 for balance-xor,

3 for broadcast, 

4 for 802.3ad, 

5 for balance-tlb,

6 for balance-alb (charp)


举报

相关推荐

0 条评论