MongoDB 全文检索

实验环境

haproxy负载均衡

配置节点解析，所有节点解析保持一致

[root@k8s5 ~]# cat /etc/hosts

[root@k8s5 ~]# yum install -y haproxy net-tools
[root@k8s5 ~]# cd /etc/haproxy/
[root@k8s5 haproxy]# vim haproxy.cfg

#---------------------------------------------------------------------
# Example configuration for a possible web application.  See the
# full configuration options online.
#
#   http://haproxy.1wt.eu/download/1.4/doc/configuration.txt
#
#---------------------------------------------------------------------

#---------------------------------------------------------------------
# Global settings
#---------------------------------------------------------------------
global
    # to have these messages end up in /var/log/haproxy.log you will
    # need to:
    #
    # 1) configure syslog to accept network log events.  This is done
    #    by adding the '-r' option to the SYSLOGD_OPTIONS in
    #    /etc/sysconfig/syslog
    #
    # 2) configure local2 events to go to the /var/log/haproxy.log
    #   file. A line like the following can be added to
    #   /etc/sysconfig/syslog
    #
    #    local2.*                       /var/log/haproxy.log
    #
    log         127.0.0.1 local2

    chroot      /var/lib/haproxy
    pidfile     /var/run/haproxy.pid
    maxconn     4000
    user        haproxy
    group       haproxy
    daemon

    # turn on stats unix socket
    stats socket /var/lib/haproxy/stats

#---------------------------------------------------------------------
# common defaults that all the 'listen' and 'backend' sections will
# use if not designated in their block
#---------------------------------------------------------------------
defaults
    mode                    http
    log                     global
    #option                  httplog
    option                  dontlognull
    option http-server-close
    #option forwardfor       except 127.0.0.0/8
    option                  redispatch
    retries                 3
    timeout http-request    10s
    timeout queue           1m
    timeout connect         10s
    timeout client          1m
    timeout server          1m
    timeout http-keep-alive 10s
    timeout check           10s
    maxconn                 3000
listen status *:80
        stats uri /status
        stats auth admin:westos

#---------------------------------------------------------------------
# main frontend which proxys to the backends
#---------------------------------------------------------------------
frontend  main *:6443
    mode tcp
    default_backend             k8s


#---------------------------------------------------------------------
# round robin balancing between the various backends
#---------------------------------------------------------------------
backend k8s
    mode tcp
    balance     roundrobin
    server  app1 192.168.92.12:6443 check
    server  app2 192.168.92.13:6443 check
    server  app3 192.168.92.14:6443 check

#注意：需要修改为自己的k8s control-plane地址

[root@k8s5 haproxy]# systemctl  start haproxy

[root@k8s5 haproxy]# netstat -antlp|grep :6443

访问监控页面：http://192.168.92.15/status

测试成功后关闭服务，不要设置自启动

[root@k8s5 haproxy]# systemctl  stop haproxy

设置免密

[root@k8s5 haproxy]# ssh-keygen

[root@k8s5 haproxy]# ssh-copy-id k8s6

k8s6节点安装haproxy软件

[root@k8s6 ~]# yum install -y haproxy

从k8s5拷贝配置文件

[root@k8s5 haproxy]# scp haproxy.cfg  k8s6:/etc/haproxy/

测试服务

访问监控页面：http://192.168.92.16/status

测试成功后关闭服务，不要设置自启动

[root@k8s6 haproxy]# systemctl  stop haproxy

pacemaker高可用

[root@k8s5 ~]# cd /etc/yum.repos.d/
[root@k8s5 yum.repos.d]# vim hjl.repo

[dvd]
name=dvd
baseurl=file:///media
gpgcheck=0

[HighAvailability]
name=HighAvailability
baseurl=file:///media/addons/HighAvailability
gpgcheck=0

同步配置文件

[root@k8s5 yum.repos.d]# scp hjl.repo  k8s6:/etc/yum.repos.d/

安装软件

[root@k8s5 yum.repos.d]# yum install  -y pacemaker pcs psmisc policycoreutils-python

[root@k8s6 ~]# yum install  -y pacemaker pcs psmisc policycoreutils-python

启动pcsd服务

[root@k8s5 ~]# systemctl enable --now pcsd.service

[root@k8s5 ~]# ssh k8s6 systemctl enable --now pcsd.service

设置用户密码

[root@k8s5 ~]# echo westos | passwd --stdin hacluster

[root@k8s5 ~]# ssh k8s6 'echo westos | passwd --stdin hacluster'

节点认证

[root@k8s5 ~]# pcs cluster auth k8s5 k8s6

创建集群

[root@k8s5 ~]# pcs cluster setup --name mycluster k8s5 k8s6

启动集群

[root@k8s5 ~]# pcs cluster start --all

集群自启动

[root@k8s5 ~]# pcs cluster enable --all

禁用stonith

[root@k8s5 ~]# pcs property set stonith-enabled=false

[root@k8s5 ~]# pcs status

添加集群资源

[root@k8s5 ~]# pcs resource create vip ocf:heartbeat:IPaddr2 ip=192.168.56.200 op monitor interval=30s

[root@k8s5 ~]# pcs resource create haproxy systemd:haproxy op  monitor interval=60s

[root@k8s5 ~]# pcs resource group add hagroup vip haproxy

测试

[root@k8s5 ~]# pcs node standby

资源全部迁移到k8s6

[root@k8s5 ~]# pcs status

恢复

[root@k8s5 ~]# pcs node  unstandby

[root@k8s5 ~]# pcs status

部署control-plane

加载内核模块（在所有集群节点执行）

[root@k8s2 ~]# vim /etc/modules-load.d/k8s.conf

overlay
br_netfilter

[root@k8s2 ~]# modprobe overlay

[root@k8s2 ~]# modprobe br_netfilter

[root@k8s3 ~]# modprobe overlay

[root@k8s3 ~]# modprobe br_netfilter

[root@k8s4 ~]# modprobe overlay

[root@k8s4 ~]# modprobe br_netfilter

[root@k8s2 ~]# vim /etc/sysctl.d/docker.conf

net.bridge.bridge-nf-call-iptables=1
net.bridge.bridge-nf-call-ip6tables=1
net.ipv4.ip_forward=1

[root@k8s2 ~]# sysctl --system

确认软件版本

[root@k8s2 ~]# rpm -q kubeadm kubelet kubectl

生成初始化配置文件

[root@k8s2 ~]# kubeadm config print init-defaults > kubeadm-init.yaml

修改配置

[root@k8s2 ~]# vim kubeadm-init.yaml

apiVersion: kubeadm.k8s.io/v1beta3
bootstrapTokens:
- groups:
  - system:bootstrappers:kubeadm:default-node-token
  token: abcdef.0123456789abcdef
  ttl: 24h0m0s
  usages:
  - signing
  - authentication
kind: InitConfiguration
localAPIEndpoint:
  advertiseAddress: 192.168.92.12
  bindPort: 6443
nodeRegistration:
  criSocket: unix:///var/run/containerd/containerd.sock
  imagePullPolicy: IfNotPresent
  name: k8s2
  taints: null
---
apiServer:
  timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta3
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controlPlaneEndpoint: "192.168.92.200:6443"
controllerManager: {}
dns: {}
etcd:
  local:
    dataDir: /var/lib/etcd
imageRepository: reg.westos.org/k8s
kind: ClusterConfiguration
kubernetesVersion: 1.24.17
networking:
  dnsDomain: cluster.local
  serviceSubnet: 10.96.0.0/12
  podSubnet: 10.244.0.0/16
scheduler: {}
---
apiVersion: kubeproxy.config.k8s.io/v1alpha1
kind: KubeProxyConfiguration
mode: ipvs

初始化集群

[root@k8s2 ~]# kubeadm init   --config kubeadm-init.yaml --upload-certs

部署网络组件

[root@k8s2 calico]# kubectl apply -f calico.yaml

[root@k8s2 ~]# kubectl get pod -A

添加其它control-plane节点

[root@k8s3 ~]# kubeadm join 192.168.92.200:6443 --token abcdef.0123456789abcdef         --discovery-token-ca-cert-hash sha256:a1f977a7de194528e84da253c3cf6c89aac1d7e78cfd5ca733ebff9e5c5c3330         --control-plane --certificate-key 35c53e03e75b37ab5ac1a6401589a6bb8d8cff5e4e8f23a03ffd1dcf2256aa9a


[root@k8s4 ~]# kubeadm join 192.168.92.200:6443 --token abcdef.0123456789abcdef         --discovery-token-ca-cert-hash sha256:a1f977a7de194528e84da253c3cf6c89aac1d7e78cfd5ca733ebff9e5c5c3330         --control-plane --certificate-key 35c53e03e75b37ab5ac1a6401589a6bb8d8cff5e4e8f23a03ffd1dcf2256aa9a

[root@k8s2 ~]# kubectl get nodes

部署worker node

新添加的节点需要初始化配置

添加解析

[root@k8s7 ~]# cat /etc/hosts

禁用swap
 

[root@k8s7 ~]# swapoff -a

[root@k8s7 ~]# vim /etc/fstab

安装containerd、kubelet、kubeadm、kubectl

从其它节点拷贝repo文件

[root@k8s4 yum.repos.d]# scp docker.repo k8s.repo k8s7:/etc/yum.repos.d/

安装软件

[root@k8s7 ~]# yum install -y containerd.io kubeadm-1.24.17-0 kubelet-1.24.17-0 kubectl-1.24.17-0

自启动服务

[root@k8s7 ~]# systemctl enable --now containerd

[root@k8s7 ~]# systemctl enable --now kubelet

拷贝containerd的配置文件

[root@k8s4 yum.repos.d]# cd /etc/containerd/
[root@k8s4 containerd]# ls

[root@k8s4 containerd]# scp -r * k8s7:/etc/containerd/

重启服务

[root@k8s7 containerd]# systemctl  restart containerd
[root@k8s7 containerd]# crictl config runtime-endpoint unix:///run/containerd/containerd.sock
[root@k8s7 containerd]# crictl pull myapp:v1

配置内核模块

[root@k8s4 containerd]# cd /etc/modules-load.d/
[root@k8s4 modules-load.d]# scp k8s.conf k8s7:/etc/modules-load.d/
[root@k8s4 modules-load.d]# cd /etc/sysctl.d/
[root@k8s4 sysctl.d]# scp docker.conf k8s7:/etc/sysctl.d/

[root@k8s7 ~]# modprobe overlay
[root@k8s7 ~]# modprobe br_netfilter
[root@k8s7 ~]# sysctl --system

加入集群

[root@k8s7 ~]# kubeadm join 192.168.92.200:6443 --token abcdef.0123456789abcdef         --discovery-token-ca-cert-hash sha256:a1f977a7de194528e84da253c3cf6c89aac1d7e78cfd5ca733ebff9e5c5c3330

测试

[root@k8s2 ~]# kubectl get nodes

[root@k8s2 ~]# kubectl create deployment myapp --image myapp:v1

[root@k8s2 ~]# kubectl get pod -o wide